Products

Grande Roma

Grande Roma

Attestation

Quality Assurance certificates shall be issued by the Quality Assurance Department stating chemical composition of heat and material testing results (e.g. ultrasound, mechanical testing) as required by the customer:

Customer Order Compliance Declaration "2.1"
The document is issued by the manufacturer to certify that the products delivered comply with customer order requirements.
The document does not state any test results.

Testing protocol "2.2"
The document is issued by the manufacturer to certify that products delivered comply with customer order requirements.
The document states general test results.

Inspection Certificate "3.1"
This is a document issued by the manufacturer in which the manufacturer confirms that the products supplied are in line with the requirements of the order and in which the manufacturer indicates the results of the tests.
The testing unit and the tests executed are iniciated in the product´s specification, in the official specifications, in the corresponding technical specifications and/or in the order.
The document is confirmed by an authorized representative of the manufacturer independent of the production units. The document is confi rmed by an authorized representative of the manufacturer independent of the production units. In the Inspection Certifi cate “3.1”, the manufacturer may indicate the results of tests obtained from testing as specifi ed by the specifi cation on the basic materials or input products used on condition that the manufacturer uses tracing procedures and can provide the necessary corresponding inspection documents.

Inspection Certificate "3.2"
This is a document prepared by an authorized representative of the manufacturer independent of the production units and either by an authorized representative of the client (inspection company) or by an inspector indicated in the offi cial specifi cations in which they declare that the products supplied are in line with the requirements of the order and which indicates the results of the tests. In the Inspection Certifi cate “3.2”, the manufacturer may indicate the results of tests obtained from testing as specifi ed by the specifi cation on the basic materials or input products used on condition that the manufacturer uses tracing procedures and can provide the necessary corresponding inspection documents.

Inspection Companies
a) national: ŘJ, ČD, ZVS, INSPEKTA, ČLPR, and others
b) international: LR, DNV, ABS, BV, GL, TÜV, RINA, Russian Naval Register of Shipping, and others
c) inspection carried out directly by the customer

Multiple certification available on request.