Products

Plates are rolled in the thickness range from 5 to 80 mm, and in the width range from 1,000 to 3,300 mm.

Plates are rolled in the thickness range from 5 to 80 mm, and in the width range from 1,000 to 3,300 mm.

Marking of plates

Product marking is performed by stamping and painting. A punch for stamping in cold condition is used for marking of plates (Four-High Mill) in low-stress spot method. Manual low-stress stamping (Two-High Mill) the low-stress method has to be agreed in the order. White paint marking is carried out with automatic marking machines, or manually (usually using templates). In case of any specific customer´s requirement for a special plate marking, either in the form of a text (sprayed with white colour on the plate), or in the form of colour marking, marking is carried out within the frame of each individual order based on agreement. The "Colour Marking Catalogue" containing individual patterns is available to make the colour marking easier.

 

EXAMPLE OF PLATE MARKING WITH COLD STAMPING

 EXAMPLE OF PLATE MARKING WITH COLD STAMPING

EXAMPLE OF PLATE MARKING WITH COLOUR

EXAMPLE OF PLATE MARKING WITH COLOUR