Products Plates Cut shapes Sheet piles
Quenched and tempered plates of 500 Q and 690 Q steel grades are supplied in the form suitable for steel structures (S500 …, S690 …) as per EN 10025-6 or in the form suitable for pressure vessels (P500…, P690…) as per EN 10028-6.
Designation as per EN 10025-6: S500 Q, S500 QL, S500 QL1, S690 Q, S690 QL, S690 QL1.
Designation as per EN 10028-6: P500 Q, P500 QH, P500 QL1, P500 QL2, P690 Q, P690 QH, P690 QL1, P690 QL2.
PARAMETERS FOR PLATES PURCHASE ORDER
Thickness | 20-80 mm |
---|---|
Width 1) | 1500-2500 mm |
Length | max. 11000 mm 2) |
Weight of one piece of plate | max. 8000 kg |
Total volume of plates ordered | multiples of 50 t |
1) Higher or lower width on agreement
2) For thickness 20–25 mm (incl.) only max. 8000 mm
MECHANICAL PROPERTIES AND CARBON EQUIVALENT
Designation | Min. Yield Strength ReH 1) [MPa] | Min. Yield Strength Rp0,2 2) [MPa] | Tensile Strength Rm 1) [MPa] | Min. Elongation [%] | Min. Impact Energy KV 3) [°C/J] - transverse | CEV max. 4) |
---|---|---|---|---|---|---|
S500 Q | 500 | - | 590-770 | 17 | -20/27 | 0,47 |
S500 QL | 500 | - | 590-770 | 17 | -40/27 | 0,47 |
S500 QL1 | 500 | - | 590-770 | 17 | -60/27 | 0,47 |
P500 Q | 500 | - | 590-770 | 17 | -20/27 | - |
P500 QH | 500 | 380 | 590-770 | 17 | -20/27 | - |
P500 QL1 | 500 | 380 | 590-770 | 17 | -40/27 | - |
P500 QL2 | 500 | 380 | 590-770 | 17 | -60/27 | - |
S690 Q | 690 | - | 770-940 | 14 | -20/27 | 0,65 |
S690 QL | 690 | - | 770-940 | 14 | -40/27 | 0,65 |
S690 QL1 | 690 | - | 770-940 | 14 | -60/27 | 0,65 |
P690 Q | 690 | - | 770-940 | 14 | -20/27 | - |
P690 QH | 690 | 570 | 770-940 | 14 | -20/27 | - |
P690 QL1 | 690 | 570 | 770-940 | 14 | -40/27 | - |
P690 QL2 | 690 | 570 | 770-940 | 14 | -60/27 | - |
1) Valid for thickness up to 50 mm, for higher thickness refer to the standard
2) Testing on agreement; valid for temperature 300 °C and thickness up to 50 mm; for other temperatures (lower)
or higher thickness refer to the standard EN 10028-6
3) For other temperatures (higher) under standard refer to the standard
4) CEV = ; only for plates supplied as per EN 10025-6; valid for thickness up to 50 mm; for higher thickness refer to the standard EN 10025-6.