Products Plates Cut shapes Sheet piles
Designation | Group | Min. Yield Strength ReH 2) [MPa] | Tensile Strength Rm [MPa] | Min. Elongation [ % ] | Min. Impact Energy KV [°C/J] - longitudinal | CEV max. 3) | Pcm max. 4) | Dimension Table No. | Max. Thickness [mm] |
---|---|---|---|---|---|---|---|---|---|
S355G5+M | 1 | 355 1) | 470 - 630 | 22 | -20/50 7) | 0,43 | ... | table 3 | 20 5) |
S355G6+M | 1 | 355 1) | 470 - 630 | 22 | -40/50 7) | 0.43 | ... | table 3 | 40 5) |
S355G7+M | 2 | 355 2) | 470 - 630 | 22 | -40/50 8) | 0.43 | 0,24 | table 3 | 40 |
S355G8+M | 3 | 355 2) | 470 - 630 | 22 | -40/50 8) | 0.43 | 0,24 | table 3 | 40 |
S355G9+M | 2 | 355 2) | 470 - 630 | 22 | -40/50 8) | 0.41 | 0,21 | table 3 | 40 |
S355G10+M | 3 | 355 2) | 470 - 630 | 22 | -40/50 8) | 0.41 | 0,21 | table 3 | 40 |
S420G1+M | 2 | 420 1) | 500 - 600 | 19 | -40/60 8) | 0,42 | 0,22 | table 3 | 30 |
S420G2+M | 3 | 420 1) | 500 - 660 | 19 | -40/60 8) | 0,42 | 0,22 | table 3 | 30 |
S460G1+M | 2 | 460 1) | 540 - 700 1) | 17 | -40/60 8) | 0,43 | 0,22 | table 3 | 30 |
S460G2+M | 3 | 460 1) | 540-700 1) | 17 | -40/60 8) | 0,43 | 0,22 | table 3 | 30 |
1) Valid for thickness up to 16 mm, for higher thickness refer to the standard
2) Valid for thickness up to 25 mm, for higher thickness refer to the standard
3)
4)
5) Under standard
6) Higher thickness up to 75 mm on agreement
7) Longitudinal
8) Transverse