Products Plates Cut shapes Sheet piles

• Catalogue
• Enquiry form
• Contacts
• Delivery conditions
• Technical equipment

* lengths up to 18 000 mm after agreement
** greater thicknesses after agreement

Making cut shapes

Cutting machine No. 1 Cortina DP4000

cutting table dimensions: W 3 300 mm, L 20 000 mm
maximum cutting thickness: 200 mm
cutting speed: 120 – 3 000 mm/min.
medium: oxygen - natural gas
number of portals/torches: 1/3

Cutting machine machine No. 2 Cortina DP 4000

cutting table dimensions: W 3 300 mm, L 18 000 mm
maximum cutting thickness: 200 mm
cutting speed: 120 – 3 000 mm/min.
medium: oxygen - natural gas
number of portals/torches: 1/3

Cutting machine No. 3 OMNIMAT L 4600

cutting table dimensions: W 3 600 mm, L 25 000 mm
maximum cutting thickness: 250 mm
cutting speed: 120 – 3 500 mm/min.
medium: oxygen - natural gas
number of portals/torches: 1/3 + manual three-torch head

Cutting machine No. 4 Vanad PROXIMA 35/280

cutting table dimensions: W 6 500 mm, L 28 500 mm
maximum cutting thickness: 250 mm
cutting speed: 120 – 3 500 mm/min.
medium: oxygen - natural gas
number of portals/torches: 1/4

Cutting machine No. 5 Pierce Plazma RUM 4000

cutting table dimensions: W 3 500 mm, L 28 000 mm
maximum cutting thickness: 30 mm + type-V manual bevel
cutting speed: max. 4000 mm/min.
medium: oxygen - electric power
number of portals/torches: 1/1 type HP 260 XD

Cutting machine No. 6 Esab 6500

cutting table dimensions: W 5 000 mm, L 24 000 mm
maximum cutting thickness: 200 mm
cutting speed: 120 – 3 500 mm/min.
medium: oxygen - natural gas
number of portals/torches: 2/4 on each carrier

Shot blasting machine Lauco

shot blasting machine dimensions: W 2 000 mm, L max. 6 000 mm
max. blasted thickness: 500 mm double-sided
abrasives: steel shot
surface quality: Sa 2.5

Cleaning of cut shapes: manually, using an electric grinder
Paint marking: white marking
Stamping: manual, low-stress dies, U-type dies or using a stamping machine
Bundling/packing: using a cycle-strap, wire or stretch wrap